Mechanical Rotary Actuators: These actuators use purely mechanical means, such as gears or levers, to convert linear motion into rotary motion. They are simple in design and often used in basic applications where precise control is not required.
Swing Gear Rack Cylinder
Spring-Loaded Rotary Actuators: These actuators store energy in springs and release it to generate rotational motion. They are often used for simpler applications or when power sources like electricity or fluids are not readily available.
Each type of rotary actuator has its advantages and is selected based on the specific application requirements, such as torque, speed, precision, environmental conditions, and available power sources.
Product specifications
|
Drive Torque Nm@21Mpa |
900 |
|
Holding Torque Nm@210MPa |
2400 |
|
Monment caoacity Cantilever mount Nm |
|
|
Radial Capacity Kg |
2130 |
|
Axial capacity Kg |
6380 |
|
Shaft mounting surface diamete mm |
117 |
|
MODELS |
9 |
|
D2 Housing diameter mm |
114 |
|
F1 Mounting holes,shaft flange mm |
M10*1.5 |
|
F2 Number of mounting holes,shaft flange |
M10*1.5 |
|
F3Bolt circle diameter,shaft flange mm |
65 |
|
F4Mounting holes,housing flange mm |
|
|
F5Number of mounting holea,housing flange |
|
|
F6Bolt circle diameter housing flange mm |
|
|
F7Shaft through-hole diameter mm |
M24 |
|
H1Centerline to valve top mm |
58.8 |
|
L1Overall Length(180°)mm |
|
|
L1Overall Length(360°)mm |
216 |
|
L2Overall Length(180°)mm |
|
|
L2Overall Length(360°)mm |
197 |
|
L3Overall Length(180°)mm |
|
|
L3Overall Length(360°)mm |
34.5 |
|
P1 P2Ports,housing |
ISO-1179-1/BSPP"G” 1/8 to 1/4 |
|
V1 V2Ports,valve |
ISO-11926/SAE 7/16 |
Inquire Form
