A joint bearing, also known as a heim joint (N. America) or rose joint (U.K. and elsewhere), is a mechanical articulating joint. Such joints are used on the ends of control rods, steering links, tie rods, or anywhere a precision articulating joint is required. A ball swivel with an opening through which a bolt or other attaching hardware may pass is pressed into a circular casing with a threaded shaft attached. The threaded portion may be either male or female. Rod End Bearing PHS10L mainly bear radial load, but also can withstand a certain amount of axial load which has little friction, high limiting speed, many type of size and forms.
Stainless Steel SI8 SA8 10T/K Ball Joint Rod End Bearings
Spherical joint bearings, also called heim joints (North America) or rose joints (UK and elsewhere), are a type of mechanical articulated joint. This type of joint is used at the end of control rods, steering links, tie rods, or wherever precision articulated joints are required. A ball swivel with an opening, bolts or other connecting hardware can pass through the opening and be pressed into a circular housing with a threaded shaft. The threaded part can be male or female. Rod End Bearings PHS10L mainly bear radial load, and can also bear certain axial load, with low friction, high limit speed, and many sizes and forms. It is suitable for precision instruments, low-noise motors, automobiles, motorcycles and general machinery. It is the most common type of bearing in the machinery industry. The rod end joint bearing is a spherical sliding bearing, equipped with a spherical inner ring, and its accuracy and hardness are equivalent to that of a steel ball bearing. It provides very smooth rotation and swing movement without gaps. Material: Rod end steel and galvanized, external thread or internal thread, spherical surface with bronze lining, carbon chromium steel inner ring, spherical surface chrome plated, can be lubricated through rod end joints or holes. It has the characteristics of large carrying capacity, convenient loading and unloading, and simplified mechanism.
Drawing and datasheet
|
Requiring maintenance, steel-on-steel, female thread-GIR..DO, GIL..DO (SI..E, SIL..ES) |
|
|
|||||||||
|
Part No. |
|
|
|
Dimension (mm) |
|
|
|
|
Mass |
|
|
|
Right |
Left |
|
|
d |
d3 |
B |
C1 |
L3 |
S |
d2 |
(kg) |
|
GIR5-DO |
GIL5-DO |
SI 5 E |
SIL 5 E |
5 |
M5X0.8 |
6 |
4.5 |
10 |
10 |
21 |
16 |
|
GIR6-DO |
GIL6-DO |
SI 6 E |
SIL 6 E |
6 |
M6 |
6 |
4.4 |
11 |
11 |
21 |
0.021 |
|
GIR8-DO |
GIL8-DO |
SI 8 E |
SIL 8 E |
8 |
M8 |
8 |
6 |
15 |
14 |
24 |
0.039 |
|
GIR10-DO |
GIL10-DO |
SI 10 E |
SIL 10 E |
10 |
M10 |
9 |
7 |
20 |
17 |
29 |
0.061 |
|
GIR12-DO |
GIL12-DO |
SI 12 E |
SIL 12 E |
12 |
M12 |
10 |
8 |
23 |
19 |
34 |
0.096 |
|
GIR15-DO |
GIL15-DO |
SI 15 ES |
SIL 15 ES |
15 |
M14 |
12 |
10 |
30 |
22 |
40 |
0.18 |
|
GIR17-DO |
GIL17-DO |
SI 17 ES |
SIL 17 ES |
17 |
M16 |
14 |
11 |
34 |
27 |
46 |
0.22 |
|
GIR20-DO |
GIL20-DO |
SI 20 ES |
SIL 20 ES |
20 |
M20x1.5 |
16 |
13 |
40 |
32 |
53 |
0.35 |
|
GIR25-DO |
GIL25-DO |
SI 25 ES |
SIL 25 ES |
25 |
M24x2 |
20 |
17 |
48 |
36 |
64 |
0.64 |
|
GIR30-DO |
GIL30-DO |
SI 30 ES |
SIL 30 ES |
30 |
M30x2 |
22 |
19 |
56 |
41 |
73 |
0.93 |
|
GIR35-DO |
GIL35-DO |
SI 35 ES |
SIL 35 ES |
35 |
M36x3 |
25 |
21 |
60 |
50 |
82 |
1.3 |
|
GIR40-DO |
GIL40-DO |
SI 40 ES |
SIL 40 ES |
40 |
M39x3 |
28 |
23 |
65 |
55 |
92 |
2 |
|
GIR45-DO |
GIL45-DO |
SI 45 ES |
SIL 45 ES |
45 |
M42x3 |
32 |
27 |
65 |
60 |
102 |
2.5 |
|
GIR50-DO |
GIL50-DO |
SI 50 ES |
SIL 50 ES |
50 |
M45x3 |
35 |
30 |
68 |
65 |
112 |
3.5 |
|
GIR60-DO |
GIL60-DO |
SI 60 ES |
SIL 60 ES |
60 |
M52x3 |
44 |
38 |
70 |
75 |
135 |
5.5 |
|
GIR70-DO |
GIL70-DO |
SI 70 ES |
SIL 70 ES |
70 |
M56x3 |
49 |
42 |
80 |
85 |
160 |
8.6 |
Inquire Form
